POWR
Removing the cylinder head
1. Remove the exhaust cover bolts in the
sequence shown.
2. Remove the timing chain tensioner 1
and camshaft caps in the sequence
shown.
3. Remove
the
chains, and disconnect the ground lead.
4. Remove the cylinder head bolts in the
sequence shown.
5-33
Power unit
camshafts
and
timing
CAUTION:
Do not scratch or damage the mating sur-
faces of the cylinder head and cylinder
block.
5. Remove the valve shim 2 from the valve
lifter 3 using compressed air.
NOTE:
Do not mix the valve train parts. Keep them
organized in their proper groups.
6. Remove the intake valve and exhaust
valves.
NOTE:
Be sure to keep the valves, springs, and
other parts in the order as they were
removed.
69J1D11