Removing The Drive Shaft; Disassembling The Drive Shaft; Disassembling The Forward Gear - Yamaha FT50C Service Manual

LOWR

Removing the drive shaft

1. Remove the drive shaft assembly and
pinion, and then pull out the forward
gear.
Drive shaft holder 4 1: 90890-06518
Pinion nut holder 2: 90890-06505
Socket adapter 2 3: 90890-06507

Disassembling the drive shaft

1. Install the pinion nut 1, tighten it finger
tight, and then remove the drive shaft
bearing 2 using a press.
CAUTION:
• Do not press the drive shaft threads a
directly.
• Do not reuse the bearing, always
replace it with a new one.
Bearing inner race attachment 3:
90890-06639

Disassembling the forward gear

1. Remove the taper roller bearing from the
forward gear using a press.
6-19
Lower unit
S62Y6850K
CAUTION:
Do not reuse the bearing, always replace
it with a new one.
Bearing separator 1: 90890-06534
2. Remove the needle bearing from the for-
ward gear.
CAUTION:
Do not reuse the bearing, always replace
it with a new one.
Stopper guide plate 2: 90890-06501
Stopper guide stand 3:
90890-06538
Bearing puller 4: 90890-06535
Bearing puller claw 1 5:
90890-06536
S62Y6740K
62Y5A11