Removing And Installing The Small Air Baffle - Silicon Graphics Altix XE210 User Manual

9. Lift the processor lever.
10. Raise the CPU load plate.
11. Remove the processor.
12. If installing a replacement processor, see
install the protective socket cover over the empty processor socket and reinstall the
chassis cover.

Removing and Installing the Small Air Baffle

Some installation processes will require that you remove the small air baffle that is placed
behind the hard drive bays, near the front of your server. The steps below describe how to
remove and then install the small air baffle. Use these steps only when it is indicated as
necessary for a component installation process.
Always operate your server system with the small air baffle in place. The small air baffle
is required for proper airflow within the server system.
32
"Installing the Processor". Otherwise,
® ®
SGI Altix XE210 User's Guide