Peripheral Devices; Hard Disk Drives; Figure 11. Optical And Hard Drive Bays - Silicon Graphics Altix XE210 User Manual

Peripheral Devices

The server system provides locations and hardware for installing hard drives and a DVD-
ROM drive. The drives must be purchased separately. The following figure shows the
available options.
.

Hard Disk Drives

The server system ships with three drive carriers for installing three Serial ATA (SATA)
hot-swap drives.
For instructions on installing hard drives, see
Drive".
Note: Drives can consume up to 17 watts of power each. Drives must be specified to run at a
maximum ambient temperature of 45C.
The SGI Altix XE210 server does not support all Serial ATA (SATA) hard drives. Contact
your SGI representative for a list of compatible drives.
® ®
SGI Altix XE210 User's Guide
A
D
A. Slimline optical drive bay (drive not
included)
B. Control panel
C. Hard Drive Status LEDs
D. Hard drive bays (drives not included)

Figure 11. Optical and Hard Drive Bays

"Installing and Removing a Hot-swap Hard
B
C
TP02156
15