Figure 37. Removing The Pci Express* Riser Card - Silicon Graphics Altix XE210 User Manual

10. Install the replacement riser connector, if desired. For instructions, see
the PCI-X* Riser
11. Install the PCI add-in card(s) if desired. For instructions, see
in
12. Install the PCI riser assembly into the server system. For instructions, see
"Installing the PCI Riser
13. Connect any cables to add-in cards that require them. See your add-in card
documentation for information and add-in card requirements.
14. Re-install the processor air duct. For instructions, see
Duct".
15. Install the server system cover. For instructions, see
16. Plug all peripheral devices and the AC power cable(s) into the server.
® ®
SGI Altix XE210 User's Guide

Figure 37. Removing the PCI Express* Riser Card

Card".
Card".
B
C
Assembly".
A
AF000359
"Installing
"Installing a PCI Add-
"Installing the Processor Air
"Installing the System Cover".
45