Product Contents; Product Support - Silicon Graphics Altix XE210 User Manual

Product Contents

Your SGI Altix XE210 server system ships with the following items:
•
Altix XE210 server board installed in the server system
•
One 600W power supply module installed in the server system
•
A box of hardware components, referred to below as the "hardware box"
•
Low-profile riser installed in the server system
•
Full-height profile riser installed in the server system
•
Optical drive tray assembly in the hardware box (optional)
•
Bridge board, installed in the server system (optional)
•
Optical drive cable installed in the server system (optional)
•
Chassis intrusion switch integrated into the server system riser
•
One 32-6mm flat screw for installing the optical drive component in the hardware
box (optional)
•
Rack handles in the hardware box
•
Peripheral bay filler panel in the hardware box
•
Control panel installed in the server system
•
Passive backplane installed in the server system
Note: The number and type of other custom items (processors, memory, disks, PCI cards,
software, etc.) vary with your order.

Product Support

SGI provides a comprehensive product support and maintenance program for its products.
For a description of this program, do one of the following:
•
See http://www.sgi.com/support/.
•
If you are in North America, contact the Technical Assistance Center at
1 (800) 800 4SGI or contact your authorized service provider.
•
If you are outside North America, see the following website for the appropriate
Customer Service phone number: http://www.sgi.com/support/supportcenters.html.
iv
® ®
SGI Altix XE210 User's Guide