Installing And Removing The Rack Handles; Installing The Rack Handles; Figure 56. Installing The Rack Handle - Silicon Graphics Altix XE210 User Manual

Installing and Removing the Rack Handles

Installing the Rack Handles

1. Observe the safety and ESD precautions at the beginning of this book. See
Information".
2. Power down the server and unplug all peripheral devices and the AC power
cable(s).
3. Remove the server system cover. For instructions, see
Cover".
4. Align the rack handle with the two holes on the side of the server system as shown
in the figure below.
5. Attach the rack handle to the server system with two screws as shown in the figure
below.
6. Install the server system cover. For instructions, see
7. Install the front bezel. For instructions, see
8. Plug all peripheral devices and the AC power cable(s) into the server.
66

Figure 56. Installing the Rack Handle

"Removing the System
AF000377
"Installing the System
"Installing the Front Bezel".
® ®
SGI Altix XE210 User's Guide
"Safety
Cover".