Figure 48. Removing The Server Board - Silicon Graphics Altix XE210 User Manual

7. Replace the server board. For instructions, see
8. Install the PCI riser assembly. For instructions, see
Assembly".
9. Install the processor air duct. For instructions, see
Duct".
10. Install the server system cover. For instructions, see
11. Plug all peripheral devices and the AC power cable(s) into the server.
® ®
SGI Altix XE210 User's Guide
A

Figure 48. Removing the Server Board

B
"Installing the Server Board".
"Installing the PCI Riser
"Installing the Processor Air
"Installing the System Cover".
57