Figure 53. Installing The Control Panel Module - Silicon Graphics Altix XE210 User Manual

8. Slide the replacement control panel into the server system (see letter "A") until it
clicks into place.
9. Connect the front panel and USB cables to the connectors on the backplane (see
letters "B" and "C").
10. Install the server system cover. For instructions, see
11. Install the front bezel. For instructions, see
12. Plug all peripheral devices and the AC power cable(s) into the server.
® ®
SGI Altix XE210 User's Guide
A

Figure 53. Installing the Control Panel Module

C
"Installing the System
"Installing the Front Bezel".
B
AF000382
Cover".
63