Programmable Settings
Dialing Mode
If you have touch tone service, set to "Tone". If rotary or pulse service is used, set
dialing mode to "Pulse". The factory preset is "Tone".
Base Unit
1
Press [FUNCTION/EDIT].
2
Scroll to "Initial setting" by pressing
[ ] or [ ], then press [ ] .
3
Scroll to "Set tel line" by pressing [ ] or
[ ], then press [ ] .
4
Press [ ] at "Set dial mode".
5
Select "Pulse" or "Tone" by pressing [ ] or
[ ].
6
Press [ ] (Save), then press [STOP].
Handset
: Press [CONF/FUNCTION], and follow steps 2 to 5 above, using
the handset. Press the soft key (
Line Mode
The line mode is preset at the factory to "B". Generally leave the line mode to "B". If
a change of the line mode setting is required by our customer call center or
serviceman, change the line mode to "A".
Base Unit
1
Press [FUNCTION/EDIT].
2
Scroll to "Initial setting" by pressing
[ ] or [ ], then press [ ] .
3
Scroll to "Set tel line" by pressing [ ] or
[ ], then press [ ] .
4
Scroll to "Set line mode" by pressing [ ]
or [ ], then press [ ] .
5
Select "A" or "B" by pressing [ ] or [ ].
6
Press [ ] (Save), then press [STOP].
Handset
: Press [CONF/FUNCTION], and follow steps 2 to 5 above, using
the handset. Press the soft key (
18
(use either
(use either
Base Unit
or
Base Unit
), then press [OFF].
SA VE
or
Handset
), then press [OFF].
SA VE
)
Handset
Initial setting
Set tel line
Set dial mode
Set dial mode
:Tone
)
Initial setting
Set tel line
Set line mode
Set line mode
:B