Table of Contents
Advertisement
––––––––––––––––––––––––––––––––––––––––––––––
Connection to Strata DK Via Toshiba
Data Interface Units
PC COM Port
DK Backup/Admin
Personal Computer
Station
DK Prog 20;
LED 01, 02, and 17
ON for PDIU-DI
or RPCI-DI Port
Figure 17
DKAdmin/DKBackup PC Connected to Strata DK Via Toshiba Data Interface Units—1000 ft.
Maximum
Customer Dialer Setup
DIU String: ATS2=43~~~ATDDYYY
(YYY is the intercom or directory number of the PDIU-DS connected to the TTY port)
Note
~~~ must be entered to send the carriage return signal following ATS2=43.
Modem String: (nothing)
After Connect String: (nothing)
To Make Connection
1. From File Menu, select Dial DK and press Enter
2. Highlight the customer form the customer list (scroll with arrow key or type initials)
3. Press F2 to establish the DIU to DIU connection. (The DIU string will be sent from the
DKAdmin/DKBackup COM port.)
4. After connection is established, select desired function from the DKAdmin/DKBackup
Main Menu.
5. After the DKAdmin/DKBackup session is complete, go to the File Menu and press h to
hang up the connection.
PC to Modem Type
Cable (Dealer Supplied)
6-pair Modular Cord
(SW1-4 Off)
Digital
Telephone with
PDIU-DI
or RPCI-DI
(integrated)
DK Prog. 20: LED 01,
04 and 17 ON for PDIU-DS Port
(2-pair - 1000 feet maximum, 24 AWG wire)
Notes
1.
Program 03 Code 41 for RSSU, PIOU, PIOU(S) slot.
Program 03, Code 49 for RSIU Slot 11.
Program 76-1, 76-2 for RSIU, RSIS, TSIU, or WSIU TTY Port setup.
2.
Program 03 Code 62 or 64 for PDKU slot.
3.
PDIU-DS Jumper plugs (P1-P9) must be set to the B-C position when
connected to the TTY port.
Connection to Strata DK Via Toshiba Data Interface Units
(Telephone type,
cross-pinned)
PDIU-DS (YYY)
***
PPTC25MDM
(yellow)
(SW1-4
Off)
Customer Strata DK
RSSU, RSIU, TSIU,
1
WSIU or RSIS
TTY
Port
1
PIOU, PIOUS
(SW3 – TTY Position)
2
PDKU
2
PDKU
3093
131
Advertisement
Table of Contents
