Voice Memory; Voice Memory Operation From The Fh-2 Remote Control Keypad - Yaesu FT DX 3000 Operating Manual

T
ranSMiTTer
( ssb/Am/Fm
v m
Oice emOry
You may utilize the Voice Memory capability of the FT
includes five memories capable of storing up to 20 seconds of voice audio each. The maximum that any memory can
hold is 20 seconds.

Voice Memory Operation from the FH-2 Remote Control Keypad

You may also utilize the Voice Memory capability of the FT
plugs into the rear panel's REM jack.
Recording Your Own
1. Select the LSB, USB, AM, or FM mode using the
front panel [ MODE ] buttons.
2. Adjust the [ MIC/SPEED ] knob, as described on
page 62.
3. Press the [ MEM ]
key on the FH-2. A blinking "REC"
icon will appear in the display.
4. Press any of the FH-2's keys numbered [ 1 ] through
[ 5 ] to select that memory storage register.
A :
dvice
If you do not press the PTT key (see next step) with-
in five seconds, the memory storage process will be
cancelled.
5. Press the microphone's PTT switch momentarily.
The "REC" icon will glow steadily and recording
will begin.
6. Speak into the microphone in a normal voice level to
record the message (such as "CQ DX, CQ DX, this
is W 6 Delta X-Ray Charlie, W 6 Delta X-Ray Char-
lie, Over"). Remember that the time limit for record-
ing any message is 20 seconds.
Page 70
c
Onvenience
mOdes
Voice in Memory
F
eaTureS
:
r
eQUires OpTiOnAl
3000 for repetitive messages. The Voice Memory system
DX
3000 from the FH-2 Remote Control Keypad, which
DX
7. Press the FH-2 [ MEM ] key to terminate the message
storage process.
Checking Your Recording
1. Be sure that the front panel [ MOX ] and [ BK-IN ] but-
ton are "Off".
2. Press the FH-2 [ 1 ] ~ [ 5 ] key (whichever one you just
recorded in). The "PLAY" icon will appear in the
display and you will hear the contents of the Voice
Memory you just recorded.
A :
dvice
You may adjust the playback level of the recording via
Menu item "015 RX OUT LEVEL".
FT
DX
dvs-6 v m
Oice emOry
3000 O M
peraTing anual
)
U
niT