Yaesu FT DX 3000 Operating Manual page 22

F p
rOnT anel
[ SCOPE ] Switch
Press this button momentarily to switch between
the MENU, the Scope, the Scope + AF-FFT, and
the Scope Memory (when there is memory) screens.
Press and hold this button for more than one second
to operate the decode function (when operating CW,
RTTY, PSK).
[ AUTO ] Switch
Press this button to operate the scope function and
initiate continuous sweeping.
[ MENU ] Switch
This button is used to access the Menu system. The
various transceiver characteristics may be config-
ured. Menu operation is described in detail, in this
manual.
i N :
mportANt ote
Pressing the [ MENU ] button will activate the Menu,
and the Menu items will appear on the display. Once
you have changed the parameters, you must press the
[ MENU ]
button to save any configuration changes.
Page 20
C
OnTrOls
& s
wiTChes
[ SELECT ] Switch
This button is used to select the Menu system.
[  ] Switch
These buttons permit selection of the Menu items
and settings.
F T 30 00 O
DX
M
peraTing anual