Tuning Group - Yaesu FT DX 3000 Operating Manual

M M
enu ODe
148 FIX 28MHz SPAN
Function: Selects the desired frequency span of the FIX
mode Spectrum Scope while monitoring on the 10 m
amateur band.
Available Values: 20 / 50 / 100 / 200 / 500 / 1000 kHz
Default Setting: 1000 kHz
149 FIX 50MHz
Function: Selects the scan start frequency of the FIX
mode Spectrum Scope while monitoring on the 6 m
amateur band.
Available Values: 50000 ~ 53999 kHz (1 kHz steps)
Default Setting: 50000 kHz
150 FIX 50MHz SPAN
Function: Selects the desired frequency span of the FIX
mode Spectrum Scope while monitoring on the 6 m
amateur band.
Available Values: 20 / 50 / 100 / 200 / 500 / 1000 kHz
Default Setting: 1000 kHz

TUNING Group

151 CW DIAL STEP
Function: Setting of the Main Tuning Dial knob and the
[CLAR/VFO-B] knob tuning speed in the CW mode.
Available Values: 1/5/10 Hz
Default Setting: 10 Hz
152 DATA DIAL STEP
Function: Setting of the Main Tuning Dial knob and the
[CLAR/VFO-B] knob tuning speed in the DATA mode.
Available Values: 1/5/10 Hz
Default Setting: 10 Hz
153 AM/FM DIAL STEP
Function: Setting of the Main Tuning Dial knob and the
[CLAR/VFO-B] knob tuning speed in the AM and FM
mode.
Available Values: 10/100 Hz
Default Setting: 100 Hz
154 RTTY DIAL STEP
Function: Setting of the Main Tuning Dial knob and the
[CLAR/VFO-B] knob tuning speed in the RTTY mode.
Available Values: 1/5/10 Hz
Default Setting: 5 Hz
Page 124
155 SSB DIAL STEP
Function: Setting of the Main Tuning Dial knob and the
[CLAR/VFO-B] knob tuning speed in the SSB mode.
Available Values: 1/5/10 Hz
Default Setting: 10 Hz
156 AM CH STEP
Function: Selects the tuning steps for the microphone's
[UP]/[DWN] keys in the AM mode.
Available Values: 2.5/5/9/10/12.5 kHz
Default Setting: 5 kHz
157 FM CH STEP
Function: Selects the tuning steps for the microphone's
[UP]/[DWN] keys in the FM mode.
Available Values: 5/6.25/10/12.5/20/25 kHz
Default Setting: 5 kHz
158 1MHz/100kHz SELECT
Function: Selects the tuning steps for the [CLAR/
VFO-B] knob when the [MHz/uT] button is pressed.
Available Values: 1MHz/100kHz
Default Setting: 1MHz
TX AUDIO Group
159 PRMTRC EQ1 FRQE
Function: Selects the center frequency of the lower
range for the parametric microphone equalizer.
Available Values: 100 ~ 700 Hz (100 Hz/step)
Default Setting: 200
You may adjust the equalizer gain and Q-factor at this
selected audio frequency via menu items "160 PRMTRC
EQ1 LEVEL" and "161 PRMTRC EQ1 BWTH".
160 PRMTRC EQ1 LEVEL
Function: Adjusts the equalizer gain of the low range of
the parametric microphone equalizer.
Available Values: - 20 ~ 0 ~ +10
Default Setting: 0
161 PRMTRC EQ1 BWTH
Function: Adjusts the Q-factor of the low range of the
parametric microphone equalizer.
Available Values: 1 ~ 10
Default Setting: 1
162 PRMTRC EQ2 FRQE
Function: Selects the center frequency of the middle
range for the parametric microphone equalizer.
Available Values: 700 ~ 1500 Hz (100 Hz/step)
Default Setting: 800
You may adjust the equalizer gain and Q-factor at this
selected audio frequency via menu items "163 PRMTRC
EQ2 LEVEL" and "164 PRMTRC EQ2 BWTH"
FT 3000 O
DX
M
peraTing anual