Yaesu FT DX 3000 Operating Manual page 129

M M
enu ODe
191 TX AUTO CR+LF
Function: Enables/Disables the sending of the Carriage
Return (CR+LF) Code while transmitting in RTTY.
Available Values: ENABLE/DISABLE
Default Setting: ENABLE
192 TX DIDDLE
Function: Selects the transmission code when there is
not a character to be transmitted.
Available Values: OFF/BLANK/LTRS
Default Setting: BLANK
193 BAUDOT CODE
Function: Selects the Baudot Code used for the RTTY
mode.
Available Values: CCITT/US
Default Setting: US
194 PSK MODE
Function: Selects the operation mode of the PSK mode.
Available Values: BPSK/QPSK
Default Setting: BPSK
195 DECODE AFC RANGE
Function: Selects the operation range (or bandwidth) of
the AFC feature.
Available Values: 8/15/30
Default Setting: 15
196 QPSK POLARITY REV
Function: Selects normal or reverse phase shift for the
QPKS mode.
Available Values: RX-N, TX-N / RX-R, TX-N /
RX-N, TX-R / RX-R, TX-R
Default Setting: RX-N, TX-N
FT 3000 O M Page 127
DX peraTing anual