Voice Memory Unit (Dvs-6) - Yaesu FT DX 3000 Operating Manual

i
nsTallaTiOn OF
3000's [ POWER ] switch "OFF", and
1. Turn the FT
DX
turn off the external DC power supply.
2. Disconnect all the cables from the FT
3. Referring to Figure 1, remove the 18 screws
attaching the bottom case, then remove the bottom
case.
4. Refer to Figure 2 for the mounting location for the
DVS-6.
5. Push the DVS-6 onto the pins corresponding to
its assigned mounting location on the transceiver.
Gently press the board down until it is firmly seated
in its connectors.
6. Replace the bottom case and its 18 screws.
7. Connect the antenna and DC power supply to the
FT 3000.
DX
Connector (5-pin)
FT 3000 O
DX peraTing
O
v M
oice eMoRy
3000.
DX
Connector (5-pin)
Connector (6-pin)
Connector (6-pin)
M
anual
a
pTiOnal
U (dvs-6)
nit
Figure 1
Figure 2
ccessOries
Page 129