Using The Voice Memory; Setting The Voice Memory Operation - Yaesu FTM-200DR Advance Manual

7. Refer to the figure on the right to mount the FVS-2.
Check the direction of the connector and plug the
FVS-2 in all the way to the back.
8. Plug in the speaker cables extending from the main
body top cover to the original connector on the board.
9. Attach the main body top cover and secure it using the
eight screws.

Using the voice memory

The voice memory permits recording the received audio in the optional FVS-2 that is
mounted inside the radio. The saved audio can be replayed on the radio and erased later.

Setting the voice memory operation

1. Press and hold the [F
• The screen for the detailed settings will be displayed.
• Cannot be selected when the optional FVS-2 is not installed.
2. Rotate the DIAL knob to select [PLAY/REC].
3. Each time press the DIAL knob, the recording operation switches.
FREE 5min: A total of 5 minutes of audio in 8 recording areas can be recorded.
LAST 30sec: The last 30 seconds will be recorded.
Factory default value: FREE 5min
4. Press any key (except Power Switch) or PTT switch to finish the setting and return to
the original screen.
] key  [108 VOICE MEMORY]  Press the DIAL knob
MENU
26
Speaker Connector
FVS-2 Connector