Yaesu FT DX 3000 Operating Manual page 69

e
nhancing
P
ArAmeTric
Activating the Parametric Microphone Equalizer
1. Adjust the [ MIC/SPEED ] knob, as described on
page 62.
2. Press the [ p/q/t/u ] button to select the "MIC
[ SELECT ] button to select "ON".
EQ", then press the
If you use the Parametric Microphone Equalizer with
the speech processor engaged, press the [ p/q/t/u ]
buttons to select the "PROC", then press the [ SE-
LECT ] button to select "ON".
The "MIC EQ" (and "PROC") will appear in the
display, confirming that the Parametric Microphone
Equalizer is engaged.
3. Press the PTT switch on the microphone, and speak
into the microphone in a normal voice level.
4. To switch the Parametric Microphone Equalizer off,
press the [ SELECT ] button repeatedly until the "MIC
EQ" icon disappears.
Center Frequency
Parametric Gain
Q ( Bandwidth )
Center Frequency
Parametric Gain
Q ( Bandwidth )
Parametric Gain
FT 3000 O
DX peraTing
T
ranSMiT
m e
icrOphOne QUAlizer
3-s p e A
TAge ArAmeTric QUAlizer
"159 PRMTRC EQ1 FREQ"
"162 PRMTRC EQ2 FREQ"
"165 PRMTRC EQ3 FREQ"
"160 PRMTRC EQ1 LEVEL"
"163 PRMTRC EQ2 LEVEL"
"166 PRMTRC EQ3 LEVEL"
"161 PRMTRC EQ1 BWTH"
"164 PRMTRC EQ2 BWTH"
"167 PRMTRC EQ3 BWTH"
3-s p e A
TAge ArAmeTric QUAlizer
"168 P-PRMTRC EQ1-FREQ"
"171 P-PRMTRC EQ2-FREQ"
"174 P-PRMTRC EQ3-FREQ"
"169 P-PRMTRC EQ1-LEVEL"
"172 P-PRMTRC EQ2-LEVEL"
"175 P-PRMTRC EQ3-LEVEL"
"170 P-PRMTRC EQ1-BWTH"
"173 P-PRMTRC EQ2-BWTH"
"176 P-PRMTRC EQ3-BWTH"
M
anual
S
ignal
( ssb/Am/Fm
[ SELECT ] Button
[ MIC/SPEED ] Knob [
p/q/t/u
djUsTmenTs (s p : "OFF")
peech rOcessOr
"100" ( Hz ) ~ "700" ( Hz )
"700" ( Hz ) ~ "1500" ( Hz )
"1500" ( Hz ) ~ "3200" ( Hz )
( Low ) "–20" ( dB ) ~ "+10" ( dB )
( Mid ) "–20" ( dB ) ~ "+10" ( dB )
( High ) "–20" ( dB ) ~ "+10" ( dB )
( Low ) "1" ~ "10"
( Mid ) "1" ~ "10"
( High ) "1" ~ "10"
djUsTmenTs (s p : "On")
peech rOcessOr
"100" ( Hz ) ~ "700" ( Hz )
"700" ( Hz ) ~ "1500" ( Hz )
"1500" ( Hz ) ~ "3200" ( Hz )
( Low ) "–20" ( dB ) ~ "+10" ( dB )
( Mid ) "–20" ( dB ) ~ "+10" ( dB )
( High ) "–20" ( dB ) ~ "+10" ( dB )
( Low ) "1" ~ "10"
( Mid ) "1" ~ "10"
( High ) "1" ~ "10"
Q
ualiTy
)
mOde
] Button
Page 67