Psk Text Memory; Example Of Data Communications Device - Yaesu FT DX 3000 Operating Manual

Phrases (up to 50 characters) frequently used in PSK transmissions can be recorded by connecting the supplied "FH-2"
Remote Control Keypad to the rear panel REM jack. 5 memory channels may be recorded, and the memorized content
can be transmitted by operations on the FH-2.
t M P
ext essage rograMMing
1. Press the [ MODE ] button to set the operating mode
to DATA.
2. Press the FH-2 [ MEM ] key. A blinking "REC" icon
will appear in the display.
3. Press an FH-2 [ 1 ] ~ [ 5 ] key to select the desired
PSK Text Memory Register into which you wish to
program the text, the blinking "REC" icon will dis-
appear.
4. Use the FH-2 [ t ] and [  ] keys to set the cursor po-
sition and use the FH-2 [ p ] and [ q ] keys to choose
the letter/number to be programmed in each slot of
the memory.
a :
dviCe
You may also use the [ CLAR/VFO-B ] knob to pro-
gram the message characters.
5. When the message is complete, add the " " character
at the end to signify the termination of the message.
6. Press and hold in the FH-2 [ MEM ] key for one sec-
ond to exit, once all characters (including " ") have
been programmed.
e
You can use commercial and free computer software for PSK data communications. See the illustration below for con-
nection to your computer.
Be sure to read the instruction manual of the device to be connected to the radio and computer.
a :
dviCe
 You can set the data output level for data communi-
cations (PSK31, SSTV, etc.) using Menu item "077
DATA OUT LEVEL".
FT 3000 O
DX peraTing
DaTa ( psk ) O
Psk t
d
xaMPle of ata
M
anual
M
ext eMory
o -t -a Psk t
n he ir
Press the FH-2 [ 1 ] ~ [ 5 ] key, depending on which PSK
Text Memory Register message you wish to transmit.
The programmed message will be transmitted on the air.
a :
dviCe
You can adjust the PSK transmit ALC by turning the
[ MIC/SPEED ] knob.
S
PO
PSK TEXT
C Q C Q C Q D E
PSK TEXT
C
oMMuniCations
 You can set VOX DELAY in VOX operation for data
communications (PSK31, SSTV, etc.) using Menu
item "079 DATA VOX DELAY". You can also set data
input VOX gain using Menu item "078 DATA VOX
GAIN".
peraTiOn
M P
ext essage layBaCk
dB
W
 D C
W X
d
eviCe
Page 107