Menu Mode; Using The Menu; Menu Mode Reset - Yaesu FT DX 3000 Operating Manual

M M
enu ODe
The Menu system of the FT
the way you want to operate it. The Menu items are grouped by general utilization category, and are numbered from "001
AGC" to "196 E/D PSK".
U M
sing the enU
1. Press the [ MENU ] button to engage the Menu mode.
The display will show the Menu Number, the Menu
Group Name and the Menu Item.
2. Rotate the [ CLAR/VFO-B ] knob (or press the p/q
button) to select the Menu item you wish to modify.
3. Press the [ SELECT ] button, then rotate the [ CLAR/
VFO-B ] knob (or press the p/q button) to change
the current setting of the selected Menu item.
A :
dvice
Press the [ CLEAR ] button (located on the upper
right of the [ CLAR/VFO-B ] knob) momentarily to
reset the selected Menu item to the factory default
value.
4. When you have finished making your adjustments,
press the [ SELECT ] button, then press and hold
the [ MENU ] button to save the new setting and exit
to normal operation. If you only momentarily press
the [ MENU ] button, the new settings will not be re-
tained.
M M
enU ode
You may reset all the Menu settings to their origi-
nal factory defaults, if desired.
1. Turn the front panel [ POWER ] switch off.
2. Press and hold in the [ MENU ] button, and
while holding it in, press the [ POWER ]
switch to turn the transceiver back on. Now
release the [ MENU ] button.
Page 108
3000 provides extensive customization capability, so you can set up your transceiver just
DX
R
eset
[ SELECT ] Button
[ MENU ] Button
FT 3000 O
DX peraTing
[ CLEAR ] Button
[ CLAR/VFO-B ] Knob
M
anual