Paper Rolled In The Fuser - Xerox WorkCentre PE16 Service Manual

7.1.5 Multi-Feeding
• Description Multiple sheets of paper are fed at once.
Check and Cause
1. Solenoid malfunction(the solenoid does not work
properly): Perform Engine Test Mode : Diagnostic
Mode code 0.
2. Friction-Pad is contaminated with foreign matter.(oil..)
3. Paper is curled.

7.1.6 Paper rolled in the fuser

• Description If contaminated at intervals of 57mm on the back of a paper.
Check and Cause
1. Contamination of the pressure roller.
(Background, Hot off set)
WorkCentre PE16
Solution
1. Replace the solenoid if necessary.
2. Clean the friction-pad with soft cloth dampened with
IPA(Isopropyl Alcohol).
3. Remove curled paper.
Solution
1. Disassemble the fuser, clean the area between the
Heat-roller and and remove the foreign matter off of
the pressure roller.
2. If background appears badly in the printing, fix it by
referring to the solutions for background.
(See 7.3.8 Background)
Troubleshooting
Service Manual
7-3
July 2003