Table of Contents
Advertisement
SYSTEM SETUP
SYSTEM SETUP
DISPLAY
:
To setup the various display options, highlight DISPLAY and press ENTER.
DISPLAY - OSD
STATUS BAR : Turns the status bar at the bottom of the live display ON or OFF.
CAMERA TITLE : Determines whether the camera title is displayed.
EVENT ICON : Determines whether the DVR recording status is shown at the top right of each channel
window.
BORDER : Determines whether there is a
BORDER COLOR : If the border is ON, the operator can choose the color of the grid lines.
MENU TRANSPARENCY : During menu setup, the live view can be seen behind the menu screen.
Changing this value determines whether the live view is more (higher value) or less (lower value) visible.
MOTION SENSOR DISPLAY : If false motion recording is occurring, the operator can use this feature to
OFF – normal display mode.
ACTIVE – areas where motion is detected are highlighted with colored blocks.
INACTIVE – areas where no motion is detected are highlighted with colored blocks.
MOTION COLOR: The color of the blocks displayed when MOTION SENSOR DISPLAY is set to
ACTIVE or INACTIVE.
MOTION TRANSPARENCY : Determines the transparency of the colored blocks when MOTION
To change any of these settings, highlight OSD and press
navigate to the option required. Press
the
CURSOR KEYS
to change the setting.
border grid around each channel in multi-screen display mode.
determine and rectify the cause in realtime.
SENSOR DISPLAY is set to ACTIVE or INACTIVE.
ENTER
to select the option (the cursor changes to yellow) and use
Click APPLY
Click the OSD menu. Click on a field to change its
setting.
Then click the
ENTER
to select. Use the
to save the setting or
22
button to toggle the setting.
CURSOR KEYS
PREVIOUS
to cancel.
to
Hide quick links:
Advertisement
Table of Contents
