SYSTEM SETUP
SYSTEM SETUP
DISPLAY : MOTION SENSOR
SENSITIVITY : Value range from 1 (Lowest) to 10 (Highest) which determines the amount of motion that is
required before motion recording will be activated by the system.
AREA SETUP : Choosing this option allows the operator to define which areas of the image are monitored
for motion detection.
Light blue grid squares represent detection areas, grey grid squares are ignored.
The sample image above shows that motion will be detected across the entire image.
Click the MOTION SENSOR menu.
Click the value on the SENSITIVITY menu.
Change the value by
Click the
the Motion Detection Area.
33
button.
button to edit