Ganz Digimaster DR4N Instruction Manual page 12

SYSTEM CONFIGURE (8CH, 16CH)
SYSTEM CONFIGURE (8CH, 16CH)
4. Rear Panel (4CH)
① Video In : BNC Port for Connection of DVR & Camera. (4 Camera Connectable)
② Loop Back : Output DVR Camera Video to Loop Back Port. (4 BNC Port)
③ Monitor Out : Output DVR Video to AV Monitor.
④ Spot Out : Output Spot-out Video to AV Monitor.
⑤ NTSC/PAL : Select NTSC or PAL
⑥ VGA OUT : Output Video to a
⑦
S-Video Out : Output Video to a
⑧ Audio Out : Output Audio Data.
⑨ Audio In : Audio Input Terminal Related with #1~4 Camera.
⑩ Ethernet (TCP/IP) :
⑪ Alarm/Relay/RS-485 : Connect Port for Sensor, Relay, & PTZ.
⑫ RS-232C : Connect Port for Program Debug.
⑬ DC Power Input : Power Supply by DC 12V Adaptor.
Tip
• When
turned
• Please Use
1 3
2 4 5
Video Format.
VGA Monitor.
S-Video device.
RJ-45 Jack to connect DVR to Ethernet/LAN for Remote Access.
Installing the DVR System, please install components with Power
OFF.
only the provided AC power cord with this DVR
6
7 8 9 10
12
11
12 13
system.