RECORD MENU
RECORD MENU
SCHEDULE
To change the SCHEDULE settings, highlight
Use the
CURSOR KEYS
The schedule grid is highlighted with a purple outline.
Press ENTER. You will see a green cursor on the upper-left block on the schedule grid.
Example : To set all channels to motion detection recording only between 18:00 and 00:00.
Use the
CURSOR KEYS
The cursor changes to yellow to show the start position.
TIMER / MOTION SETUP
to highlight SCHEDULE and press ENTER.
to move the green cursor to the 18:00 position and press ENTER.
Click on the SCHEDULE menu tab.
and press ENTER.
Click on the schedule grid.
Select the Time and Channel to set the schedule for
by choosing a box inside the grid.
54