Start Up/ Shutdown - Ganz digimaster DR-4FX1 Operation Manual

Start Up/ Shutdown

START
You can connect DVR to a PC in the same network and control or manipulate it on the PC monitor.
1. Connect the adaptor to the 12VDC power input port in the rear panel of DVR.

Make connection when the power is not applied yet.
2. Connect AC cable to the power source. With a beep, the logo screen appears several
seconds after the front LED turns on.
3. When the booting process is completed, the live screen then the login screen appears.
Log In
To manipulate or access the menus of DVR, you should have logged in.
1. When the system starts, the login screen appears.
2. Select a user and provide the password.
The default password of the "ADMIN" account is
"1234".
Click <OK>.
3.
If the login information is correct and valid, you will
see the live screen.

For safe and secure use of the product, change
the password after purchasing.
.
Log Out
To prevent unauthorized access, it is recommended to log out when you leave the screen.

Hover the cursor near the bottom of the screen to display the menu.
In the monitoring screen, click <MENU> in the
1.
bottom left corner of the screen to <LOG OUT>,
or press the [LOGOUT] button on the remote
control.
2. While logged out, Search / Backup /
System Setup / Record Setup / System Shutdown
menus are restricted to use.
Monitoring
３