Table of Contents
Advertisement
SYSTEM SETUP
SYSTEM SETUP
SYSTEM : CONTROL DEVICE
This platform will allow up to 254 DVRs to be controlled from the same keyboard or IR Remote Controller.
SYSTEM ID : If more than one DVR is connected on the same RS-485 bus, each one must have a unique ID.
Note : If use more than one DVR on stack, each DVR must have unique ID for control by Remote controller.
PROTOCOL : This is the driver set that is used for an external Serial controller.
BAUD RATE : This value should be set to match the baud rate of the PTZ controller.
EVENT / SENSOR
To setup the various event handling options, highlight EVENT/SENSOR and press ENTER.
Click the CONTROL DEVICE menu.
Select the SYSTEM ID, the PTZ Protocol or the PTZ
BAUD RATE to edit these values.
Click the
EVENT / SENSOR
44
menu.
Hide quick links:
Advertisement
Table of Contents
