Ganz Digimaster DR4N Instruction Manual page 52

RECORD MENU
RECORD MENU
PARAMETER (continued)
Press ENTER, and a green cursor will appear on the timebar.
The green cursor shown represents a one-hour block of time. (in this case between 00:00 and 01:00).
The table below the time bar will show the recording settings for this block of time.
Example: To change the recording settings between 09:00 and 18:00.
Use the CURSOR KEYS
The cursor changes to yellow to show the start position.
Use the CURSOR KEYS to stretch the yellow selection area across to the 18:00 position.
to move the green cursor to the 09:00 position and press ENTER.
Click on the TIMEBAR.
You may use the mouse to select a one-hour block of
time by clicking on the desired block.
Click and drag the mouse along the timebar to
select several one-hour blocks that you wish to set
the recording properties for.
You may select all 24 of the blocks on the timebar
to adjust the recording properties for the entire day.
52