1. Safety Instruction
The Company shall not have any responsibility for any accident or damage that may
incur during the use of the product. For your safety, we provide a few instructions
about installation, manipulation, cleaning, assembly/disassembly of the product as
below. So please read carefully and comply with the instructions.
Before installation
Comply with the following instructions to prevent a fire, explosion,
system failure or electric shock
● Remove the power supply module before proceeding
● Check the input voltage (AC100V–AC240V) to the power supply module before
connecting it
● Keep the product away from excessive humidity (refer to optimal operating
temperature indicated in product specification sheet)
● Ensure that all devices connected to the product should be properly earth-
grounded
In operation mode
Comply with the following instructions to prevent a fire, explosion,
system failure or electric shock
● If in need of disassemble the product for service, please consult with our
trained technician before proceeding
● Do not connect multiple devices to a single adapter, Exceeding the capacity
may cause abnormal heat generation or fire
● Keep products away from excessive dust or flammable substances (e.g.:
propane gas)
● Do not touch it with wet hand while powered on
● Do not insert a conductor the ventilation system
1 Overview