Ganz Digimaster DR4N Instruction Manual page 70

REMOTE CLIENT SETUP
REMOTE CLIENT SETUP
EXPLAINATION OF FUNCTION KEYS
①
CAMERA SELECTION Buttons : Indicates Connected Camera #; or Select Camera # to see the image.
②
NETWORK STATUS Button : Show the network status of the connected DVR.
③
ALARM Button : Toggle Alarm Relay Output.
TALKBACK Button : Communicate between DVR and Remote Client using your PC microphone.
AUDIO Button : Listen to live audio (toggle ON/OFF).
④
SEARCH Button : Switch to the Search Mode for search and playback of recorded data.
SETUP Button : Local Configuration of the client software; change or check the connection settings.
DVR SETUP Button : Remote Setup of the currently connected DVR. (requires ADMIN-level access)
⑤
DROP DOWN LIST : Select the DVR group to connect to.
⑥
CONNECT Button : Connect to the DVR group.
DISCONNECT Button : Disconnect from the DVR group.
⑦
DISPLAY Button : Change the screen division mode to 1, 4, 9 or 16-channel view.
⑧
SEQUENCE Button : Change automatically from one channel to the next in a single-channel view mode.
MANUAL SWITCH Button : Change the live screen manually by mouse click.
FULL SCREEN Button : Change to the full screen mode. (all client functions are hidden in this mode)
⑨
SAVE TO AVI Button : Save the current displayed live video to an AVI file.
EVENT VIEWER Button : Show a list of the current DVR events .
⑩
PTZ CONTROL Button : Control the PAN / TILT / ZOOM and other functions on a PTZ camera.
70