System Configure - Ganz Digimaster DR4N Instruction Manual

SYSTEM CONFIGURE

SYSTEM CONFIGURE
5. Remote Controller
POWER
System
ON/OFF
ID Button
Select DVR ID※
RETURN
Cancel /
Deselect
Previous Screen
※ If there are many DVRs on stack, each DVR must be set different ID then Remote controller set each
ID on DVR. Can control all DVRs on one Remote controller by each ID.
How to set ID on the remote controller
: Press the ID button then displayed INPUT ID statement.
Press the set ID and Press the RETURN button (The default ID is 01). For DVR ID, see the page44.
For returning to the original situation, press the ID button again.
And Input the 255 and press the RETURN button of remote controller.
– Remote Controller
– Remote Controller
ID
MENU : Open System Setup Menu
Channel Selection Buttons
ENTER : Apply / Select /Go to Next Screen
Navigation Buttons : Used for Playback Control,
Menu Navigation, and PTZ/Focus Control
Change Display
Search Menu
Mode
13
PTZ/IRIS Mode