Ganz Digimaster DR4N Instruction Manual page 73

REMOTE CLIENT SETUP
REMOTE CLIENT SETUP
DETAIL SETUP (continued)
To complete the details for the selected DVR:
- Check the events that the DVR will send to the remote client system event log.
- Check 'Audio out' to enable the bi-directional audio talkback function.
- Check 'Alarm out' to enable the remote alarm relay trigger function.
- In 'Monitoring audio' choose which audio input is transmitted to the remote client software in live view mode.
- In 'Connection retries' choose the number of times the remote client will attempt to re-connect on a failure.
When you have completed the configuration of all DVR properties, click ADD to save all the details.
To add up to three more DVR systems into this group – simply repeat the steps from the previous page in
the 'Enter DVR details' section.
To create another connection group, repeat the steps from the previous page in the 'Create a connection
group' section.
During operation, only one group can be connected to at one time.
For example: 'OFFICE' must be disconnected before connecting to 'PARKING LOT'.
73