Ganz Digimaster DR4N Instruction Manual page 72

REMOTE CLIENT SETUP
REMOTE CLIENT SETUP
DETAIL SETUP
In the 'Camera Assignment' window, specific channels of the DVR can be allocated to the remote client
display channels. The client window will show up to 16 channels of video, in a 4x4 grid display.
Using the drop down lists under the DVR section, select which channels are displayed and in what position.
To ignore certain channels, leave the drop down marked with an 'x'.
In this case, only channels 1-4 from the selected DVR will be displayed.
NOTE: Only one instance of each channel of the DVR can be selected.
NOTE: Each connection group can display a total of 16 channels from one or more DVRs.
For example, a connection group could consist of one 16-channel DVR and display all of its 16
channels at a time. Or, it might consist of two 16 channel DVRs, displaying 7 channels from one
unit, and 9 channels from another. You may use up to 4 DVR units, and up to 16 channels of video.
Up to 4 DVR units can be added to the each group.
Click on the group name to highlight it.
The fields to fill in the DVR information will activate.
Enter the following information into the 'DVR
Information' window.
Name: Any name that will easily identify the DVR.
IP / Domain Name:
The IP address or domain name of the DVR.
Port: The network port of the DVR. (Default: 6100)
User ID: A valid user ID already setup on the DVR.
Password: The password assigned to the user ID.
72