Table of Contents
Advertisement
SYSTEM SETUP
SYSTEM SETUP
EVENT / SENSOR : BUZZER OUT
These settings determine the behavior and types of events that will trigger the internal buzzer.
Behavior settings
OPERATION : The internal buzzer can be enabled or disabled.
MODE : Can be either TRANSPARENT (the buzzer sounds only when the alarm condition is present)
or LATCHED (the buzzer sounds for a set period of time after the alarm trigger).
DURATION : In LATCHED mode, the time that the buzzer sounds after it has been triggered.
HDD EVENT : Determines whether a hard drive event will activate the buzzer.
Action settings
ALARM : Determines whether any selected alarm inputs will sound the buzzer.
VIDEO LOSS : Determines whether video loss on any of the selected channels will sound the buzzer.
MOTION : Determines whether motion detection on any of the selected channels will sound the buzzer.
NOTE: Remember to select APPLY and press ENTER to save all settings before exiting the menus.
Click the BUZZER OUTPUT menu.
Click on a field in order to change it.
Use the
button to change the value.
47
Hide quick links:
Advertisement
Table of Contents
