S E Q U E N C; P A N I C R E C O R D I N - Ganz Digimaster DR4N Instruction Manual

LIVE DISPLAY
LIVE DISPLAY
Sequence
Press the SEQ button. Each channel is shown in full screen for a set period of time (default 3 sec)
before switching to the next channel.
To stop the sequence on a particular channel, press the
More complex sequences can be programmed through the setup menu (page 25).
Panic Recording
Panic recording will override all standard recording settings to provide, by default, continuous recording on
all channels. The Panic Recording settings can be edited within the Record Menu.
Press the PANIC button. The top right of the display shows a red square only to indicate that the DVR is in
panic recording mode.
Press the PANIC button again to return to normal
Click the right mouse button on the Live Display
screen and Click the
SEQ button again.
Click the right mouse button on the Live Display
screen and Click the
Timer or Motion recording mode.
18
SEQUENCE menu.
PANIC RECORDING menu.