Ganz Digimaster DR4N Instruction Manual page 32

SYSTEM SETUP
SYSTEM SETUP
DISPLAY : PTZ SETUP
ADDRESS: The unique ID of the PTZ device.
PROTOCOL: The protocol of the PTZ device.
BAUD RATE: The baud rate of the PTZ device.
PTZ properties can also be adjusted for each channel by selecting the
Note that some settings, such as AUTO FOCUS, may not be compatible with particular PTZ equipment.
If this is the case, changing this value will have no effect on PTZ control.
Click the PTZ SETUP menu.
Click on each value within the ADDRESS,
PROTOCOL and BAUD RATE menu.
Change the value by
(0 ~ 255)
Click the
by button.
32
button.
button to change the PTZ details
icon and pressing ENTER.