Ganz Digimaster DR4N Instruction Manual page 26

SYSTEM SETUP
SYSTEM SETUP
DISPLAY : SEQUENCE
The square on the top left of the display represents the first sequence screen to be displayed.
To edit the screen, press ENTER to turn the cursor yellow. Using the up and down CURSOR KEYS,
choose the display mode (single-channel or various multi-screen modes).
When the correct screen type is displayed, use the CHANNEL SELECTION buttons to enter the channels
into each section of the multi screen modes.
Note: Only one instance of each channel can be displayed.
To remove a channel, press the appropriate CHANNEL SELECTION button again.
(continued)
26
Double click on the first screen of the sequence,
and the box will be outlined in yellow.
Each time the screen is clicked, the display mode
will change.
Right-click on a section of the multi-screen display.
Then click the desired camera number to assign it.