Ganz Digimaster DR4N Instruction Manual page 35

SYSTEM SETUP
SYSTEM SETUP
DISPLAY : MOTION SENSOR
NOTE: The motion recording schedule must be defined within the RECORD MENU, as described
on page 52. Without setting the schedule, the DVR system will use Timer (Continuous) Recording.
(continued)
Use the CURSOR KEYS to increase the size of
the motion area as desired.
Press ENTER to change the motion area from
selected to deselected (or vice versa).
Repeat the above sequence as necessary to mask
off or include other areas of the image.
Click the right mouse button and select
SAVE & EXIT from the menu.
Once the detection area has been defined,
press RETURN and choose SAVE & EXIT to
save the area and return to the motion setup
menu. To exit without saving, choose CANCEL.
35