Power Supply Status Led; Rps Status Led - HP 5800-48G Installation Manual

Power supply status LED

A power supply status LED shows how the hot swappable power supply in a slot is operating.
Table 23 Power supply status LED description
LED mark
PWR1
PWR2

RPS status LED

The RPS status LED shows the status of the RPS DC input.
Table 24 describes the RPS status LED behaviors for the 5800-24G, 5800-24G TAA, 5800-48G (1 slot),
and 5800-48G TAA (1 slot) switches.
Table 25 describes the RPS status LED behaviors for the 5800-24G-PoE+, 5800-24G-PoE+TAA,
5800-48G-PoE+ (1 slot), and 5800-48G-PoE+ TAA (1 slot) switches.
Table 24 RPS status LED description (I)
LED mark
RPS
Table 25 RPS status LED description (II)
LED mark
RPS
Status Description
A power supply is installed in power supply slot 1, and the power
Steady green
output is normal.
A power supply is installed in power supply slot 1, but the power
Steady yellow
supply has an output problem.
No power supply is installed in power supply slot 1, or no power
Off
is being input.
A power supply is installed in power supply slot 2, and the power
Steady green
output is normal.
A power supply is installed in power supply slot 2, but the power
Steady yellow
supply has an input problem.
No power supply is installed in power supply slot 2, or no power
Off
is input.
Status Description
Both the RPS DC input and the AC input are normal, or an RPS is
Steady green
connected and the AC input is normal.
The RPS DC input is normal, but the AC input is disconnected or
Steady yellow
has failed.
Off No RPS is connected.
Status Description
Steady green Both the RPS DC input and the AC input are normal.
The RPS DC input is normal, but the AC input is disconnected or
Steady yellow
has failed.
Off The RPS DC input is abnormal or no RPS is connected.
99