Download Print this page

HP 5800-48G Installation Manual: Removing A Fan Tray

Hp 5820x & 5800 switch series installation guide.
Hide thumbs

Advertisement

Figure 24 Installing an LSW1FAN fan tray
Figure 25 Installing an LSW1BFAN fan tray
Figure 26 Installing an LSWM1FANSC or LSWM1FANSCB fan tray

Removing a fan tray

WARNING!
Take out the fan tray after the fans completely stop rotating.
To avoid an unbalanced fan causing loud noise, do not touch the fans, even if they are not rotating.
To remove a fan tray:
1.
Wear an ESD wrist strap and make sure it makes good skin contact and is correctly grounded.
2.
Loosen the captive screw of the fan tray with a Phillips screwdriver until it is fully disengaged from
the switch chassis.
22

Advertisement

   Also See for HP 5800-48G

Comments to this Manuals

Symbols: 0
Latest comments: