Power Supply Status Led; Rps Status Led; Port Mode Led - HP 5130 EI Switch Series Installation Manual

Power supply status LED

The HP 5130-24G-SFP-4SFP+ EI switch provides the PWR1 and PWR2 LEDs on the front panel to indicate
the operating status of the power supplies.
Table 20 Power supply status LED description
LED mark
PWR1/PWR2

RPS status LED

The HP
5130-48G-PoE+-2SFP+-2XGT
5130-24G-PoE+-4SFP+ (370W) EI BR, HP 5130-48G-4SFP+ EI, HP 5130-48G-4SFP+ EI BR, HP
5130-48G-PoE+-4SFP+ (370W) EI BR, and HP 5130-48G-PoE+-4SFP+ (370W) EI switches support RPS
input and provide an RPS status LED on the front panel to indicate the RPS operating status.
Table 21 RPS status LED description
LED mark
RPS

Port mode LED

The HP 5130-24G-PoE+-2SFP+-2XGT (370W) EI, HP 5130-48G-PoE+-2SFP+-2XGT (370W) EI, HP
5130-24G-PoE+-4SFP+ (370W) EI, HP 5130-24G-PoE+-4SFP+ (370W) EI BR, HP 5130-48G-PoE+-4SFP+
(370W) EI BR, and HP 5130-48G-PoE+-4SFP+ (370W) EI switches provide a port mode LED. The port
mode LED indicates the type of information that the network port LEDs are showing. You can use the port
LED mode switching button to change the type of displayed port information.
Table 22 Port mode LED description
LED mark
Mode
Status
Steady green
Steady yellow
Steady red
Off
5130-48G-2SFP+-2XGT
(370W)
Status
Steady green
Steady yellow
Off
Status
Steady green
Flashing green
Description
A power supply is installed in the power supply slot, and the power
supply is outputting power correctly.
A power supply is installed in the power supply slot, but the power
supply is faulty or not powered on.
A power supply is installed in the power supply slot, but the power
supply is faulty.
No power supply is installed in the power supply slot.
EI, HP 5130-24G-PoE+-2SFP+-2XGT
EI, HP 5130-24G-PoE+-4SFP+
Description
Both the RPS DC input and the AC input are normal.
The RPS DC input is normal, but the AC input is disconnected or
has failed.
The RPS DC input has failed, or no RPS is connected.
Description
The network port LEDs are showing port rates.
The network port LEDs are showing the PoE status of the ports.
50
(370W) EI, HP
(370W) EI, HP