Download Print this page

HP 5800-48G Installation Manual Page 44

Hp 5820x & 5800 switch series installation guide.
Hide thumbs


Do not use excessive force when you install the OAP card. If you cannot insert the OAP card
smoothly, examine the installation method for mistakes.
Figure 51 Removing the filler panel from the OAP card slot
(1) Rotate counterclockwise
Put away the removed filler panel for future use.
Unpack the OAP card and verify that this OAP card can be installed in the OAP card slot.
Hold the OAP card with the ejector levers on top, push the OAP card slowly along the guide rails
into the slot (see callout 3 in
in position (see callout 4 in
Figure 52 Installing an OAP card
(1) OAP card
(3) Push the OAP card
Fasten the captive screws on the OAP card with the Phillips screwdriver to secure the OAP card in
the slot.
(2) Filler panel in the OAP card slot
52), and push the ejector levers inward to lock the OAP card
(2) Chassis rear panel
(4) Push the ejector levers inward
(3) Phillips screwdriver


   Also See for HP 5800-48G

   Related Manuals for HP 5800-48G

Comments to this Manuals

Symbols: 0
Latest comments: