Connecting The Power Cord; Connecting An Ac Power Cord To The Switch - HP 5800-48G Installation Manual

Connecting the power cord

Table 7 Power cord connection procedures at a glance
Power supply
Built-in power supply
AC input
–54 VDC input (RPS powered)
12 VDC input (RPS powered)
Hot swappable power supply
•
PSR150-A
•
PSR150-A1
•
PSR150-D
•
PSR150-D1
•
PSR300- 1 2A
•
PSR300- 1 2A2
•
PSR300- 1 2D1
•
PSR300- 1 2D2
PSR750-A
•
650 W AC power supply
•
300 W AC power supply
•
650 W DC power supply
•
300 W DC power supply

Connecting an AC power cord to the switch

This section applies to the 5800-48G-PoE+ (1 slot), 5800-48G-PoE+ TAA (1 slot), 5800-24G-PoE+,
5800-24G-PoE+TAA, 5800-48G (1 slot), 5800-48G TAA (1 slot), 5800-24G, and 5800-24G TAA
switches.
To connect an AC power cord to these switches:
Connect one end of the AC power cord to the AC-input power receptacle on the switch (see
1.
36 or Figure
2. Connect the other end of the power cord to the AC power outlet.
Connection procedure reference
Connecting an AC power cord to the switch
Connecting the switch to a –54 VDC output RPS
Connecting the switch to a 12 VDC output RPS
Connecting the PSR150-A/PSR150-A1 power supply
•
–48 VDC input:
Connecting the PSR150-D/PSR150-D1 power supply to a –48 VDC
power source
•
–54 VDC input (RPS powered):
Connecting the PSR150-D/PSR150-D1 power supply to a –54 VDC
output RPS
Connecting the PSR300-12A/PSR300-12A2 power supply
•
–48 VDC input:
Connecting the PSR300- 1 2D1/PSR300- 1 2D2 power supply to a –48
VDC power source
•
–54 VDC input (RPS powered):
Connecting the PSR300- 1 2D1/PSR300- 1 2D2 power supply to a –54
VDC output RPS
Connecting the PSR750-A power supply
Connecting the 650 W AC/300 W AC power supply
–48 VDC input:
Connecting the 650 W DC/300 W DC power supply
37).
28
Figure