Power Supply Status Led - HP Aruba 8325 Series Installation And Getting Started Manual

Figure 10: Aruba 8325 power supplies
1
3
Table 18: Aruba 8325 power supplies
Label
1
2
3
4
The Aruba 8325 switch is shipped with two hot-swappable, field-replaceable, AC or DC power supplies. Each AC
power supply has a country-specific power cord for connection to an AC power outlet. Each DC power supply uses
a DC power cable (5400-3519 or equivalent 8 AWG cable) for connection to a DC power source. The switch can
operate with one active power supply.

Power supply status LED

Table 19: Power supply LED behavior
Power Supply
LED
Status LED
24
Description
Aruba 8325 650W 100-240VAC FB PSU (JL632A), red latch
Aruba 8325 650W 100-240VAC BF PSU (JL633A), blue latch
Aruba 8325 850W 48VDC FB PSU (JL861A), red latch
Aruba 8325 850W 48VDC BF PSU (JL862A), blue latch
Function
To display power
supply status.
2
4
State Meaning
On green The power supply is operating normally.
Flashing green or The power supply is experiencing a fault, or has
on red power but is not installed in the switch unit.
Off Power is not connected to the power supply or, if
power is connected, the power supply is in
protection mode due to a voltage, current,
thermal, or short-circuit condition.
Aruba 8325 Switch Installation and Getting Started Guide