Download Print this page

HP 5800-48G Installation Manual Page 18

Hp 5820x & 5800 switch series installation guide.
Hide thumbs

Advertisement

Figure 10 Attaching the front mounting brackets/chassis rails to the chassis
Attaching the mounting brackets to the chassis (for all the
switches except the 5800AF-48G/5820AF-24XG)
All 5800 and 5820X switches except the 5800AF-48G and the 5820AF-24XG have three mounting
positions: one front mounting position (near the network ports), one mid-mounting position, and one rear
mounting position (near the power supplies).
To attach the mounting brackets in one of these positions:
1.
Align one mounting bracket with the screw holes in the front-mounting position
mid-mounting position
These figures show attaching a 1U bracket to a 1U switch chassis. To attach a 2U bracket to a 2U
switch chassis, see
2.
Use M4 screws (supplied with the switch) to attach the mounting bracket to the chassis.
3.
Repeat the proceeding steps to attach the other mounting bracket to the chassis.
Figure 11 1U mounting bracket front mounting position
Figure 12 1U bracket mid-mounting position
(Figure
12), or the rear-mounting position
Figure
14.
12
(Figure
(Figure
13).
11),

Advertisement

   Also See for HP 5800-48G

   Related Manuals for HP 5800-48G

Comments to this Manuals

Symbols: 0
Latest comments: