HP 5500 EI Series Installation Manual: System Status Led; Power Supply Status Leds; Rps Status Led

Hide thumbs

Advertisement

LED
RPS status LED
Port mode LED
Seven-segment LED
10/100/1000Base-T Ethernet port LED
SFP port status LED
Interface card status LED

System status LED

The system status LED shows the operating status of the switch.
Table 12 System status LED description
LED mark
SYS/PWR
Power supply status LEDs
Only the 5500-24G-SFP EI (2 slots) and 5500-24G-SFP EI TAA (2 slots) switches have power supply status
LEDs to show the operating status of the power supplies in the power supply slots.
Table 13 Hot swappable power supply status LED description
LED
PWR1
PWR2
RPS status LED
The RPS status LED shows the operating status of the RPS DC input.
The 5500-24G-SFP EI (2 slots) and 5500-24G-SFP EI TAA (2 slots) switches do not have an RPS status
LED.
Status
Steady green
Flashing green (1 Hz)
Steady red
Flashing yellow (1 Hz)
Off
Status
Steady green
Steady yellow
Off
56
Availability
Entire series (except the 5500-24G-SFP EI (2 slots)
and 5500-24G-SFP EI TAA (2 slots) )
Entire series
Entire series
Entire series
Entire series
Entire series
Description
The switch is operating correctly.
The switch is performing power-on self test (POST).
POST has failed.
Some ports have failed to pass POST.
The switch is powered off.
Description
A power supply is installed in the power supply slot,
and the power output is normal.
A power supply is installed in the power supply slot,
but the power supply is experiencing an output error
or is not powered on.
No power supply is installed in the power supply slot.

Advertisement

This manual also for:

5500 si series

Comments to this Manuals

Symbols: 0
Latest comments: