× Bookmark added
Download Print This Page

HP 5800-48G Installation Manual Page 72

Hp 5820x & 5800 switch series installation guide.
Hide thumbs


Figure 70 Rear panel
(1) OAP card slot
(3) Grounding screw
(5) Power supply slot 1
(7) Hot swappable fan tray
The 5800-48G-PoE+ (2 slots) and 5800-48G-PoE+ TAA (2 slots) switches come with power supply slot
1 empty and power supply slot 2 installed with a filler panel. You can install one or two power supplies
for the switch as needed. In this figure, two PSR300-12A AC power supplies are installed in the slots.
These two switches also come with the PoE module slot and the OAP card slot covered by filler panels.
In this figure, a PoE module is installed.
5800-48G (1 slot)/5800-48G TAA (1 slot)
Figure 71 Front panel
(1) 10/100/1000Base-T auto-sensing Ethernet port
(3) Seven-segment LED
(5) SFP+ port LED
(7) System status LED (SYS)
(9) Interface card status LED (SLOT1)
(11) Port LED mode switching button
To use the console port and USB port, open the logo plate, as shown in
(2) PoE module slot
(4) Filler modules
(6) Power supply slot 2
(2) 10/100/1000Base-T Ethernet port LED
(4) Port mode LED
(6) Logo plate (A console port and a USB port are
under this logo plate)
(8) RPS status LED (RPS)
(10) SFP+ port


   Also See for HP 5800-48G

Comments to this Manuals

Symbols: 0
Latest comments: