Port Mode Led; Seven-Segment Led - HP 5800-48G Installation Manual

Port mode LED

The port mode LED indicates the type of information that the network port LEDs are showing. You can use
the port LED mode switching button to change the type of displayed port information.
Table 26 Port mode LED description
LED mark
Mode

Seven-segment LED

The seven-segment LED, together with the system status LED, shows detailed system operating information
(see Table 27).
The seven-segment LED can also show the total PoE output power as a percentage of the maximum PoE
output power that a PoE-capable switch can supply (see
5800-48G-PoE+ (2 slots), 5800-48G-PoE+ TAA (2 slots), 5800-48G-PoE+ (1 slot), 5800-48G-PoE+ TAA
(1 slot), 5800-24G-PoE+, and 5800-24G-PoE+TAA.
Table 27 Seven-segment LED description (I)
System status LED
(SYS) status
Flashing green
Flashing red
Flashing green
Steady red
Steady red
Status
Steady green
Flashing green (1 Hz)
(available only for PoE
switches)
Steady yellow
Seven-segment LED (Unit) status
The LED displays numbers one by one.
The LED displays flashing numbers.
A bar rotates clockwise around the LED.
The LED displays a flashing F character.
The LED displays a flashing t character.
Description
The network port LEDs are showing port rates.
The network port LEDs are showing the status of PoE power
supply on the ports.
The network port LEDs are showing duplex modes.
Table
100
28). The PoE switches include
Description
POST is running, and the LED displays
the ongoing test item ID.
POST has failed, and the LED flashes
the ID of the failed test item.
Software is loading.
The switch is experiencing a fan
failure.
The switch is in an over-temperature
condition.