HP 5800-48G Installation Manual page 19

Figure 13 1U bracket rear mounting position
Figure 14 2U bracket front mounting position
NOTE:
Installing the 2U mounting brackets in the rear mounting position is the same as installing the brackets
•
in the front mounting position.
To install the 2U mounting brackets in the mid-mounting position of a 2U switch chassis, first use a
•
screwdriver to loosen the three captive screws and separate the mounting brackets from the cable
management brackets (see
Figure 15 Separating a cable management bracket from a mounting bracket
(1) Captive screws
Figure 15).
(2) Cable management bracket
13
(3) Mounting bracket