Table of Contents
Advertisement
Time Format: Select different time display mode for the appointed channel
Date Format: Select different date display mode for the appointed channel
Bright: Adjust the brightness for the appointed channel
Contrast: Adjust the contrast for the appointed channel
Saturation: Adjust the saturation for the appointed channel
Hue: Adjust the hue for the appointed channel
Title Location: Set the channel title location for the appointed channel
Date Adjustment: Set the channel date location for the appointed channel
Cyclotron arrow: Restore the default parameters
After all parameters setting completed, click "Save" and the it comes into effect immediately.
Encoding
IP Camera "Encoding" setting interface as figure 3-14.
Compress type: Main Stream(Normal)/ Sub Stream/ Main Stream(Event) selectable
Stream: Including complex stream/ video stream two types
Resolution: According to the front camera supported, how the camera resolution type supported, the corresponding resolution will
selectable
Bitrate Type: Constant/ Variable selectable
Bitrate: Set different bitrate for different channels
Frame Rate: Select different frame rate in the drop-down list,, default is "Full Frame"
Quality: Select different image quality according to your need, default is "Highest"
Video Encode: H.264/ MJPEG two kinds of video encode format
I frame Interval: Set the I frame internal time
After all parameters setting completed, click "Save" and the it comes into effect immediately. ( "Setup" setting will change the front
camera parameters directly)
Video Parameters
IP Camera "video Parameters" setting interface as figure 3-15.
Figure 3-14
Honeywell
12
Advertisement
Table of Contents
